被调教跪着打屁股,精品人妻系列无码人妻免费视频,99久久久无码国产精品试看,久久久久久精品免费无码无

歡迎來上海碩光電子科技有限公司!
首頁 > 產品中心 > 離心機 > 臺式大容量離心機 > desktop large-capacity centrifuge

產品名稱:desktop large-capacity centrifuge

產品型號:SG-851-type

更新時間:2019-05-05

廠商性質:生產廠家

訪問次數:2704

產品報價:

產品特點:SG-851-type desktop large-capacity electric centrifuge is the company to meet the needs of various laboratories, carefully designed and sophisticated process technology

產品詳細資料:

SG-851-type desktop large-capacity electric centrifuge is the company to meet the needs of various laboratories, carefully designed and sophisticated process technology, large capacity for various types of laboratory experiments by centrifugation of precision instruments。
This high-speed centrifuges used centrifuge rotor rotating centrifugal force generated by the powerful, to speed up the settling velocity of particles in the liquid, the samples of different sedimentation coefficient and buoyant density of the material separate, is a non-uniform system of liquid separation equipment.

Features:
1, attractive appearance, small size, fully functional
2, light weight, large capacity
3, simple, easy to use
4, stable, adjustable speed and can automatically adjust the balance
5, low temperature rise of high efficiency, wide adaptability
6, applies to the hospital laboratory, biochemistry laboratory for qualitative analysis, for plasma, serum, urea, and vaccine manufacturing use.

Technical data:

1, time range 0-60
2, rated power: 200W
3, speed range :500-6000 r / min
4, centrifugal Capacity: 50ml * 6
5, the centrifugal force: 7250g
6, Dimensions (mm): length * width * height 380 * 280 *270

Handling Precautions
Work in a high speed centrifuge, used to safety and to ensure that the equipment to maintain high precision work, we must do the following:
(1).Centrifuges used to be placed in a smooth, strong on the counter; large-capacity high-speed low-speed centrifuge and refrigerated centrifuge to be placed accordingly on the ground in a solid, level place. Centrifuge work done, the load balancing, weight error as small as possible, otherwise it will cause severe vibration, and shaft damage turned centrifuge.
(2).Centrifuge starts, switch knob should be on the low speed position, start and then gradually adjust to the desired value. A work, shall knob again transferred to low-bit work, at high speed block ban on direct start.
(3).Rotor in the strict inspection before each use if a foreign body and the dirt hole, in order to maintain balance. Turned around and must be kept dry and clean, do not impact abrasion. Such as accidentally dropped, turned to X-ray film should check that no internal injury can continue to use. Turned after each use with warm water (50 ℃ ~ 60 ℃) and neutral detergent immersion cleaning, and finally with distilled or deionized water rinse, soft cloth after drying with hair dryer, wax, dry place.
(4).Pull all kinds of tube length, strength and stretch are different, should the need to use, the tube can be made of many different materials, such as polyethylene, cellulose, polycarbonates, polypropylene. Use care to ensure the sample, non-corrosive materials, solvent and gradient centrifuge tube and cap components. Expired, the aging, there are cracks or corrosion of the tube by minimizing or spin-down use. Control the use of plastic tube number, pay attention to standard matching. Centrifugal process may open the centrifuge lid, not by hand or foreign body collisions are turned and the rotation of the centrifuge tube.
(5) To ensure safety, be sure to use ground wire
(6).In the centrifuge process, such as abnormal phenomena, such as the noise and vibration is not normal, should immediay stop checks, not to find reasons not to continue to operate .
(7).Daily use of centrifuges in the process, every three months the level of response to host a degree of correction for each transfer using 500 million deal with a vacuum pump oil, working 500h should check drive motor carbon brush, preferably with a vacuum cleaner to friction toner remove, if necessary, to replace carbon brushes or commutator with fine sandpaper polish.Should be cleaned about every driver using the 1500h site with high-speed bearings and grease shaft and turned rust-proof joint of fat should be kept painted, do not be long-term anti-rust oil coating oil paper wrap. When not in use should be switched each month low 1 or 2 times, each time 0.5h, to ensure the normal operation of the site.
(8). Be sure to place the centrifuge tube placed symmetrically, and to keep the weight fairly. Things in the open centrifuge to centrifuge lid.
(9). Centrifugal liquid should not be too low boiling point,Should pay attention to internal and external pressure ratio.If it is toxic reagents, but also good ventilation treatment.
 

 相關同類產品:

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7

上海碩光電子科技有限公司 版權所有

ICP備案號:滬ICP備14032911號-5 管理登陸 技術支持:化工儀器網   總流量:470311  sitemap.xml

在線客服
  • 劉先生

    021-65682142

    13816422470

在線客服
用心服務 成就你我
国务院发展研究中心主任| 姓一乱一口一交A片文| 无码专区一VA亚洲V专区在线| 丰满雪白人妻人爽AV精品| 久久狠狠高潮亚洲精品| 诱人的奶头BD在线观看| 无码高潮少妇毛多水多水免费| 日本熟妇人妻xxxx| H高潮嗯啊娇喘抽搐A片视频动漫| 久久久欧美精品激情| 中文字幕在线播放| 精品久久久无码中文字幕| 打屁股羞耻扒开撅着| 狠狠做五月深爱婷婷天天综合| 人妻丰满熟妇AV无码区HD| 亚洲精品国偷拍自产在线| 久久久精品午夜免费不卡| 粗大的内捧猛烈进出爽视频| 国产成人亚洲精品无码H在线| 国产无遮挡裸体免费视频在线观看| 美女扒开尿口让男人桶| 中国大肥胖VPSWINDOWS| 国产精品日本一区二区在线播放| 欲妇荡岳丰满交换| 亚洲国产精品无码久久一区二区| 99国产精品久久99久久久| 国产成人啪精品视频免费软件| 国产精品免费精品自在线观看| 久久99国产精一区二区三区| 我和丰满岳疯狂做爰| 女性自慰特黄A片免费看| 国产精品爆乳尤物99精品| 无码免费人妻A片AAA毛片一区| 无码人妻精品一区二区三区下载| 99久久国产综合精品| 亚洲精品无码久久久| 欧美牲交a欧美牲交aⅴ久久| 日韩精品无码AV中文无码版| 久久久WWW成人免费毛片| 11孩岁女被A片黑人黑与白| 国产AV天堂无码一区二区三区|